分享

供应商质量工程师Supplier Quality Engineer

Position Overview:
The Supplier Quality Engineer should be proficient in Plastic parts /sheet metal parts process quality control and has more than 5 years supplier management experience. Good communication skill and team work spirit are very important for this position. SQE这个岗位需要精通塑胶件/钣金件的过程品质管控且必须有5年以上供应商管理工作经验。良好的沟通能力及团队合作意识对于这个岗位非常重要。
Responsible for supplier quality management, supplier audit, sample qualification, on-site quality inspection.
负责供应商质量管理,供应商审核,样品承认,到供应商处的现场检验和监督。

Main Responsibilities:
1. Responsible for supplier’s process control and prevent incoming NC from supplier. 负责供应商的制程管控,以及预防供应商来料质量不良
1.1Conduct on-site product inspection before suppliers deliver goods, report and solve quality issues. 到供应商处的执行现场检验和监督,报告并解决质量问题。
1.2Setup the acceptable quality standards/quality requirements, coach supplier to follow. 定义质量标准和质量要求,培训供应商
1.3Monitor supplier’s process quality control and review supplier’s quality control plan. 监督供应商的过程质量控制和审核供应商的质量控制计划
1.4Drive supplier to take corrective & preventive actions for quality issue, follow up to close. 推动供应商采取纠正预防措施,跟踪质量问题的解决
1.5Monitor supplier’s performance, drive supplier on continuous improvement, include but not limit to establish quality requirement and checklist, optimize assembly process and working flow, find out quality issue and suggest solutions, lead continual quality improvement actives etc. 监督供应商的质量绩效,推动供应商持续改善,包括但不限于要求供应商建立质量系统,优化制造/组装过程和工作流程,发现质量问题提供建议,主导质量持续改进活动等。
2. Carry out sample qualification together with sourcing engineer. 与国产化工程师一起实施样品认证
3. Make IQC inspection quality control plan. 制定进料检验质量控制计划
4. Plan and carry out supplier audit, including supplier’s manufacture process audit and supplier’s quality system audit, follow up the actions of NC which was found in Audit. 计划和实施供应商审核,包括供应商制造过程审核和供应商质量体系审核,跟踪审核结果并结案。
5. In charge of customer complaint handling (responsible project/product), communicate with supplier to find out root cause, take corrective actions & preventive actions. 自己所负责项目/产品的客户投诉处理,与供应商沟通以找出根本原因并采取纠正预防措施。

Main Requirements:
1.Bachelor or above, major in Mechanical Engineering or Mechatronics
本科或本科以上学历,机械工程或机电一体化专业
2.Minimum 3 years’ work experience in plastic injection molding industry or mechanical manufacturing industry, and minimum 5 years’ supplier quality management experience.
3 年或以上注塑或机械制造行业工作经验以及5年或以上供应商质量管理经验
3.Familiar with the plastic parts/sheet metal process quality control
熟悉塑胶件/钣金件制程的品质管控
4.Professional quality management knowledge, quality tools and problem-solving skills.
具有专业的质量管理知识,质量工具和问题解决方法。。
5.Good spoken and written English skill, good communication skills & cooperation spirit, good conflict resolution skill, proactive and responsible team player.
良好的英语听说读写能力,优秀的沟通能力和合作精神,良好的冲突解决能力, 是个积极主动,负责任的团队合作者。

请投简历至 job@tomra.cn